Details

---

BUY 2SD1409A https://www.utsource.net/itm/p/12607699.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	800	V	IC = 10 mA, TA = 25掳C
Emitter-Base Voltage	VEBO	-	-	6	V	IE = 100 mA, TA = 25掳C
Collector-Base Voltage	VCBO	-	-	800	V	IC = 10 mA, TA = 25掳C
Continuous Collector Current	IC	-	-	300	mA	TC = 25掳C
Total Power Dissipation	PT	-	-	625	mW	TC = 25掳C
Junction Temperature	TJ	-	-	150	掳C	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-

Instructions for Use:

1. Handling Precautions:

   • Avoid excessive mechanical stress on the leads.
   • Handle with care to prevent damage to the device.

2. Mounting:

   • Ensure proper heat dissipation if operating near maximum power dissipation.
   • Use appropriate mounting techniques to ensure good thermal contact.

3. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) according to the circuit diagram.
   • Ensure that the voltage and current ratings are not exceeded.

4. Operating Conditions:

   • Operate within the specified temperature range to avoid damage.
   • Monitor the junction temperature to prevent overheating.

5. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive environments.

6. Testing:

   • Use a multimeter or appropriate test equipment to verify the device parameters.
   • Follow standard testing procedures to ensure accurate readings.

7. Soldering:

   • Use a soldering iron with a temperature not exceeding 300掳C.
   • Solder each lead quickly to avoid thermal stress on the device.

(For reference only)