Details

---

BUY 2SC1623A-T1B https://www.utsource.net/itm/p/12607706.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	80	-	V
Collector-Base Voltage	VCB	-	80	-	V
Emitter-Base Voltage	VEB	-	5	-	V
Collector Current	IC	-	300	-	mA
Base Current	IB	-	30	-	mA
Power Dissipation	PT	-	625	-	mW
Junction Temperature	TJ	-	150	-	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Transition Frequency	fT	-	300	-	MHz

Instructions for Use:

1. Mounting:

   • Ensure proper heat dissipation by mounting the transistor on a heatsink if operating near maximum power dissipation.
   • Avoid mechanical stress on the leads during soldering and handling.

2. Soldering:

   • Use a temperature-controlled soldering iron set to a maximum of 300掳C.
   • Solder each lead for no more than 3 seconds to prevent thermal damage to the device.

3. Electrical Connections:

   • Connect the collector (C) to the positive supply or load.
   • Connect the emitter (E) to ground or the negative side of the load.
   • Connect the base (B) to the control circuit, ensuring that the base current is within the specified limits.

4. Biasing:

   • Use appropriate biasing circuits to ensure stable operation and avoid saturation or cutoff conditions.
   • For linear applications, use a voltage divider network to set the base voltage.

5. Protection:

   • Include a reverse-biased diode across the load to protect against inductive spikes if driving inductive loads.
   • Consider using a zener diode to clamp the collector voltage if there is a risk of overvoltage.

6. Storage:

   • Store in a dry, cool place away from direct sunlight and sources of heat.
   • Handle with care to avoid static discharge, which can damage the device.

7. Testing:

   • Before installing the transistor in a circuit, test it using a multimeter or transistor tester to ensure it is functioning correctly.
   • Check for continuity between the leads and verify the forward and reverse characteristics.

8. Compliance:

   • Ensure that the operating conditions do not exceed the maximum ratings listed in the parameter table.
   • Follow all relevant safety and regulatory guidelines for electronic components.

(For reference only)