Details

---

BUY 2SB631KE https://www.utsource.net/itm/p/12607714.html

Below is the parameter table and instructions for the 2SB631KE transistor:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	-	80	V
Emitter-Base Voltage	VEB	-	-	5	V
Collector Current	IC	-	-	15	A
Base Current	IB	-	-	3	A
Power Dissipation	PT	-	-	150	W
Operating Temperature	Top	-40	-	150	掳C
Storage Temperature	Tstg	-55	-	150	掳C
Transition Frequency	fT	-	1.5	-	MHz
DC Current Gain	hFE	20	100	300	-

Instructions

1. Mounting and Handling:

   • Handle the 2SB631KE with care to avoid damage to the leads and body.
   • Ensure that the mounting surface is clean and flat.
   • Use a heat sink if the power dissipation exceeds the safe operating limits.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Ensure that the voltage and current ratings are not exceeded.
   • Use appropriate wiring and connectors to prevent short circuits and ensure reliable operation.

3. Thermal Management:

   • Monitor the temperature of the device during operation.
   • If the device is expected to operate at high temperatures, use a heat sink with sufficient thermal conductivity.
   • Ensure adequate ventilation to dissipate heat effectively.

4. Storage and Transportation:

   • Store the 2SB631KE in a dry, cool place away from direct sunlight.
   • Avoid exposure to extreme temperatures and humidity.
   • Use anti-static packaging to protect the device from electrostatic discharge (ESD).

5. Testing and Troubleshooting:

   • Use a multimeter or an oscilloscope to test the device parameters.
   • Check for proper connections and ensure that all components are functioning correctly.
   • Refer to the datasheet for detailed testing procedures and troubleshooting tips.

By following these instructions, you can ensure the reliable and efficient operation of the 2SB631KE transistor.

(For reference only)