Details

---

BUY 2SA1488 https://www.utsource.net/itm/p/12607717.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	Vceo	-	-	60	V
Collector-Base Voltage	Vcbo	-	-	70	V
Emitter-Base Voltage	Vebo	-	-	5	V
Collector Current	Ic	-	-	3	A
Base Current	Ib	-	-	0.3	A
Power Dissipation	Ptot	-	-	65	W
Forward Current Transfer Ratio (hFE)	hFE	20	100	300	-
Transition Frequency	ft	-	200	-	MHz
Storage Temperature Range	Tstg	-55	-	150	掳C
Operating Temperature Range	Topr	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to manage power dissipation.
   • Avoid mechanical stress on the leads during soldering.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Ensure that the maximum ratings for voltage and current are not exceeded.

3. Biasing:

   • Use appropriate biasing circuits to ensure stable operation.
   • For linear applications, use negative feedback to improve linearity and stability.

4. Thermal Management:

   • Monitor the junction temperature to prevent overheating.
   • Use thermal paste between the transistor and the heatsink for better thermal conductivity.

5. Storage:

   • Store in a dry place to prevent moisture damage.
   • Handle with care to avoid static discharge which can damage the device.

6. Testing:

   • Use a multimeter or transistor tester to verify the functionality before installation.
   • Check for any short circuits or open circuits in the connections.

7. Safety:

   • Always disconnect the power supply when making changes to the circuit.
   • Use appropriate personal protective equipment (PPE) when handling high voltages.

By following these guidelines, you can ensure optimal performance and longevity of the 2SA1488 transistor.

(For reference only)