Details

---

BUY 74HC193AP https://www.utsource.net/itm/p/12607720.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.0	-	6.0	V
Input Low Voltage	VIL	VCC = 4.5V to 5.5V	0.8	-	-	V
Input High Voltage	VIH	VCC = 4.5V to 5.5V	-	-	2.0	V
Output Low Voltage	VOL	IOL = 4mA, VCC = 4.5V to 5.5V	0.1	-	-	V
Output High Voltage	VOH	IOH = -0.4mA, VCC = 4.5V to 5.5V	-	-	4.5	V
Propagation Delay Time	tpd	VCC = 4.5V to 5.5V, TA = 25掳C	-	25	-	ns
Power Dissipation	PD	Continuous	-	-	100	mW
Operating Temperature Range	TA	-	-40	-	85	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C

Instructions for Using 74HC193AP:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Signals:

   • Input signals should be within the specified input voltage levels (V_IL and V_IH).
   • Avoid exceeding the maximum input voltage to prevent damage to the device.

3. Output Signals:

   • The output voltages (V_OL and V_OH) are designed to meet the specified levels under the given conditions.
   • Ensure that the load connected to the outputs does not exceed the maximum current ratings.

4. Propagation Delay:

   • The propagation delay time (t_pd) is crucial for timing considerations in your circuit. It is typically around 25ns at room temperature and standard supply voltage.

5. Temperature Considerations:

   • The operating temperature range (T_A) is from -40掳C to 85掳C. Ensure the device is used within this range to avoid performance degradation or failure.
   • The storage temperature range (T_STG) is from -65掳C to 150掳C, which is important for handling and storage conditions.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat dissipation if the device is expected to operate near this limit.

7. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Store the device in a dry and cool environment to prevent moisture damage.

By following these guidelines, you can ensure reliable operation of the 74HC193AP in your circuits.

(For reference only)