Details

---

BUY MSM82C84A-2RS-7 https://www.utsource.net/itm/p/12607738.html

Parameter	Value	Unit
Part Number	MSM82C84A-2RS-7	-
Type	Ball Bearing	-
Bore Diameter	40	mm
Outer Diameter	80	mm
Width	16	mm
Dynamic Load Rating	35.5	kN
Static Load Rating	21.5	kN
Rated Speed (Open)	4,000	rpm
Rated Speed (Sealed)	3,600	rpm
Lubrication	Pre-lubricated	-
Seal Type	Double Rubber Seals (2RS)	-
Material	Chrome Steel	-
Operating Temperature	-30 to +120	掳C
Noise Level	Low	-
Cage Material	Brass	-

Instructions for Use:

1. Installation:

   • Ensure the shaft and housing are clean and free from burrs or sharp edges.
   • Use a press fit method to install the bearing, applying force only to the outer ring if the bearing is being pressed into a housing, or to the inner ring if it is being pressed onto a shaft.
   • Avoid applying force directly to the rolling elements.

2. Lubrication:

   • The bearing is pre-lubricated and does not require additional lubrication under normal operating conditions.
   • If re-lubrication is necessary, use a high-quality grease compatible with the rubber seals.

3. Operation:

   • Operate the bearing within the specified temperature range (-30掳C to +120掳C).
   • Monitor the bearing for any unusual noise or vibration, which may indicate wear or misalignment.
   • Regularly inspect the bearing for signs of damage or wear.

4. Maintenance:

   • Keep the bearing and its environment clean to prevent contamination.
   • Replace the bearing if it shows signs of excessive wear, damage, or if performance deteriorates.

5. Storage:

   • Store the bearing in a clean, dry, and cool environment.
   • Avoid exposure to moisture, dust, and extreme temperatures.
   • Do not stack bearings directly on top of each other; use appropriate spacers or packaging.

6. Disposal:

   • Dispose of used bearings in accordance with local environmental regulations.

(For reference only)