Details

---

BUY 2SD985 https://www.utsource.net/itm/p/12607742.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	30	V
Emitter-Collector Voltage	VECS	-	-	30	V
Collector-Base Voltage	VCBO	-	-	40	V
Base-Emitter Voltage	VBE	-	1.8	2.5	V
Continuous Collector Current	IC	-	-	0.5	A
Continuous Base Current	IB	-	-	0.1	A
Power Dissipation	PT	-	-	625	mW
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature Range	TSTG	-55	-	150	掳C

Instructions for Use:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings listed in the table to prevent damage.
   • Use appropriate heat sinks if operating near the maximum power dissipation.

2. Mounting:

   • Ensure proper alignment and secure mounting to avoid mechanical stress.
   • Use thermal paste or a thermal pad between the transistor and the heat sink for better heat dissipation.

3. Biasing:

   • Ensure that the base-emitter voltage (V_BE) is within the specified range to maintain reliable operation.
   • Use current-limiting resistors to protect the base from excessive current.

4. Testing:

   • Test the transistor with a multimeter or a dedicated transistor tester to ensure it is functioning correctly before integrating it into a circuit.
   • Check for any short circuits or open circuits in the connections.

5. Storage:

   • Store the transistor in a dry, cool place away from direct sunlight and extreme temperatures.
   • Handle the transistor by the body, not the leads, to avoid static discharge.

6. Soldering:

   • Use a low-wattage soldering iron to avoid overheating the transistor.
   • Ensure that the soldering iron is grounded to prevent electrostatic discharge (ESD).

7. Circuit Design:

   • Refer to application notes and datasheets for specific circuit design recommendations.
   • Consider using protective components like diodes and capacitors to safeguard against transient voltages and currents.

8. Environmental Considerations:

   • Ensure the operating environment does not exceed the storage temperature range to prevent degradation of performance or failure.

(For reference only)