Details

---

BUY RURG8060 https://www.utsource.net/itm/p/12607753.html

Parameter	Description	Value
Part Number	Component Identifier	RURG8060
Type	Component Type	Rectifier Diode
Package	Encapsulation	DO-214AC (SMA)
Max Reverse Voltage	Maximum Reverse Voltage (VRSM)	80V
Max Forward Current	Maximum Forward Current (IFSM)	60A
Peak Reverse Current	Peak Reverse Current (IRM)	500mA
Forward Voltage	Forward Voltage at Rated Current (VF)	1.1V @ 30A
Reverse Recovery Time	Reverse Recovery Time (trr)	75ns
Operating Temperature	Operating Temperature Range	-55掳C to +150掳C
Storage Temperature	Storage Temperature Range	-65掳C to +175掳C
Mounting Type	Mounting Method	Surface Mount

Instructions for Use:

1. Handling Precautions:

   • Handle the RURG8060 with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) protection when handling the component.

2. Soldering:

   • Use a soldering iron with a temperature setting of 260掳C 卤 10掳C.
   • Soldering time should not exceed 10 seconds per connection.
   • Avoid excessive heat to prevent damage to the diode.

3. Mounting:

   • Ensure that the leads are aligned correctly with the PCB pads.
   • Apply gentle pressure to ensure good contact during soldering.
   • Allow the solder to cool naturally without disturbing the component.

4. Storage:

   • Store the RURG8060 in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

5. Testing:

   • Use a multimeter or diode tester to verify the functionality of the diode.
   • Check for continuity and reverse bias resistance to ensure the diode is functioning correctly.

6. Design Considerations:

   • Ensure that the maximum ratings are not exceeded during operation.
   • Provide adequate heat dissipation if operating at high currents.
   • Use bypass capacitors to filter out noise and improve circuit stability.

(For reference only)