Details

---

BUY SN54LS32J https://www.utsource.net/itm/p/12607763.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.75	5.0	5.25	V
Input High Voltage	VIH	II = -0.1 mA	2.0		5.25	V
Input Low Voltage	VIL	II = 1.6 mA	0		0.8	V
Output High Voltage	VOH	IO = -0.4 mA	2.4		5.25	V
Output Low Voltage	VOL	IO = 16 mA	0		0.5	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C	12	15	18	ns
Power Dissipation	PD	Per Package			350	mW
Operating Temperature	TA	Commercial	0		70	掳C
Storage Temperature	TSTG		-65		150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range (4.75V to 5.25V) to avoid damage to the device.
   • Connect a decoupling capacitor (typically 0.1 渭F) close to the power pins to filter out noise.

2. Input Signals:

   • Input signals should be within the valid input voltage range (0V to 5.25V).
   • Ensure that the input current does not exceed the specified limits to prevent damage.

3. Output Signals:

   • The output high and low voltages must be within the specified ranges to ensure proper logic levels.
   • Do not exceed the maximum output current to avoid overheating or damaging the device.

4. Propagation Delay:

   • The propagation delay time (t_pd) is crucial for timing considerations in digital circuits. Ensure that your design accounts for this delay to maintain proper signal integrity.

5. Temperature Considerations:

   • Operate the device within the specified temperature range (0掳C to 70掳C) for reliable performance.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

6. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Use proper anti-static measures when handling and storing the device.

7. Mounting:

   • Follow recommended soldering profiles and mounting guidelines to ensure proper attachment and thermal management.
   • Avoid excessive mechanical stress on the leads and body of the device during assembly.

By adhering to these parameters and instructions, you can ensure optimal performance and reliability of the SN54LS32J component in your application.

(For reference only)