Details

---

BUY LM2416T https://www.utsource.net/itm/p/12607768.html

Parameter	Symbol	Min	Typ	Max	Unit
Input Voltage	VIN	3.0	-	5.5	V
Output Voltage	VOUT	1.8	-	5.0	V
Output Current	IOUT	-	1.5	2.0	A
Quiescent Current	IQ	-	0.02	0.05	A
Dropout Voltage	VDROPOUT	-	0.3	0.5	V
Operating Temperature	TOPR	-40	-	125	掳C
Storage Temperature	TSTG	-65	-	150	掳C
Thermal Resistance (胃JA)	胃JA	-	45	-	掳C/W

Instructions for Using the LM2416T

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 3.0V to 5.5V.
   • The input voltage should be stable and free from excessive noise.

2. Output Voltage (VOUT):

   • Set the output voltage using external resistors if adjustable version is used.
   • For fixed output versions, the voltage is pre-set and does not require external components.

3. Output Current (IOUT):

   • The LM2416T can provide up to 2.0A of output current, with a typical value of 1.5A.
   • Ensure the load does not exceed the maximum output current to avoid overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is typically 0.02A and can go up to 0.05A.
   • This current is drawn by the regulator even when no load is connected.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is the difference between the input and output voltages at which the regulator can no longer maintain regulation.
   • Typical dropout voltage is 0.3V, with a maximum of 0.5V.

6. Operating Temperature (TOPR):

   • The operating temperature range is from -40掳C to 125掳C.
   • Ensure the device is not exposed to temperatures outside this range to prevent damage.

7. Storage Temperature (TSTG):

   • The storage temperature range is from -65掳C to 150掳C.
   • Store the device in a dry and cool environment to ensure long-term reliability.

8. Thermal Resistance (胃JA):

   • The thermal resistance from junction to ambient is typically 45掳C/W.
   • Use a heatsink if the power dissipation is high to keep the junction temperature within safe limits.

9. Capacitor Selection:

   • Use appropriate input and output capacitors to stabilize the voltage and filter out noise.
   • Recommended values are typically 10渭F for input and 10渭F for output, but check the datasheet for specific recommendations.

10. PCB Layout:

    • Place the input and output capacitors as close as possible to the regulator to minimize parasitic inductance.
    • Ensure good thermal management by providing a large copper area or heatsink for heat dissipation.

11. Testing:

    • After assembly, test the regulator under various conditions to ensure it meets the required specifications.
    • Check for proper output voltage, stability, and thermal performance.

By following these instructions, you can ensure optimal performance and reliability of the LM2416T in your application.

(For reference only)