Details

---

BUY TLP-112A https://www.utsource.net/itm/p/12607775.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 20mA		1.2	1.5	V
Peak Forward Current	IFP	Pulse Width ≤ 1ms, Duty ≤ 2%			100	mA
Reverse Voltage	VR				5	V
Reverse Current	IR	VR = 5V	-10		10	μA
Output Current	IO	VDD = 5V, RL = 500Ω		10		mA
Turn-ON Time	tON	IF = 20mA, VDD = 5V		2	4	μs
Turn-OFF Time	tOFF	IF = 20mA, VDD = 5V		2	4	μs

Instructions for Use:

1. Installation and Handling:

   • Handle the TLP-112A with care to avoid damage from electrostatic discharge (ESD).
   • Ensure proper orientation during installation.

2. Forward Current:

   • Do not exceed the peak forward current rating under any circumstances.
   • For continuous operation, ensure the forward current does not exceed the typical value specified.

3. Reverse Voltage:

   • The device should not be subjected to reverse voltages exceeding the maximum specified limit to prevent damage.

4. Output Current:

   • Verify that the load resistance and supply voltage are within the limits to ensure the output current does not exceed the rated value.

5. Timing Parameters:

   • Consider the turn-on and turn-off times when designing circuits to ensure reliable switching operations.

6. Environmental Conditions:

   • Operate the device within the recommended temperature range to maintain performance and reliability.

7. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive substances.

(For reference only)