Details

---

BUY HB2aE-DC12V https://www.utsource.net/itm/p/12607784.html

Parameter	Value
Model	HB2aE-DC12V
Type	Relay Module
Supply Voltage	DC 12V
Operating Current	≤ 40mA
Contact Form	SPDT (Single Pole Double Throw)
Load Capacity	10A, 250VAC / 10A, 30VDC
Control Signal	3-32VDC
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +125°C
Insulation Resistance	≥ 100MΩ at 500VDC
Dielectric Strength	1500VAC for 1 minute
Life Expectancy	100,000 operations
Weight	35g
Dimensions	35mm x 15mm x 7mm

Instructions:

1. Power Supply: Connect the DC 12V power supply to the VCC and GND terminals.
2. Control Signal: Apply a control signal between 3VDC and 32VDC to the IN terminal to activate the relay.
3. Load Connection: Connect the load to the COM, NO (Normally Open), and NC (Normally Closed) terminals as required.
4. Mounting: Ensure the module is mounted in a well-ventilated area to prevent overheating.
5. Safety: Do not exceed the maximum load capacity or operating voltage to avoid damage to the relay.
6. Handling: Handle with care to avoid physical damage. Avoid exposure to moisture and corrosive environments.
7. Testing: Before connecting to the main circuit, test the relay operation using a simple load like an LED or a small lamp.

(For reference only)