Details

---

BUY TAS5706BPAPR https://www.utsource.net/itm/p/12607819.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage	2.7	-	5.5	V
Standby Current	Current consumption in standby mode	-	10	-	渭A
Operating Current	Typical operating current	-	250	-	mA
Input Voltage Range	Range of input voltages for analog inputs	0	-	VDD	V
Signal-to-Noise Ratio (SNR)	Ratio of signal power to noise power	-	98	-	dB
Total Harmonic Distortion + Noise (THD+N)	Distortion and noise at full scale output	-	0.005	-	%
Output Power	Maximum output power into 4惟 load	-	2.5	-	W
Operating Temperature Range	Temperature range for normal operation	-40	-	85	掳C
Storage Temperature Range	Temperature range for storage	-65	-	150	掳C
Package Type	Type of package	-	TSSOP-24	-	-

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Use a stable power supply to avoid voltage fluctuations that can affect performance.

2. Standby Mode:

   • To enter standby mode, set the appropriate control pin to the specified level (usually low).
   • The device will consume approximately 10 渭A in this mode.

3. Input Signals:

   • Analog input signals should be within the range of 0 to VDD.
   • Ensure proper signal conditioning if the input signal exceeds these limits.

4. Output Configuration:

   • Connect the output to a 4惟 load for optimal performance.
   • The maximum output power is 2.5W into a 4惟 load.

5. Thermal Management:

   • Operate the device within the temperature range of -40掳C to 85掳C for reliable performance.
   • Store the device in an environment with temperatures between -65掳C and 150掳C.

6. Signal Quality:

   • The device provides a high signal-to-noise ratio (SNR) of 98 dB and low total harmonic distortion plus noise (THD+N) of 0.005%.
   • These parameters ensure high-quality audio output.

7. Package Handling:

   • The TAS5706BPAPR is available in a TSSOP-24 package.
   • Handle the device with care to avoid damage to the pins and internal components.

8. Application Notes:

   • Refer to the datasheet and application notes for detailed information on circuit design, layout guidelines, and specific use cases.

(For reference only)