Details

---

BUY G3TB-OA203PZ5-24VDC https://www.utsource.net/itm/p/12607839.html

Parameter	Description	Value
Part Number	Full part number	G3TB-OA203PZ5-24VDC
Type	Solid State Relay (SSR)	-
Input Voltage	Operating input voltage range	20 - 24 VDC
Input Current	Operating input current	10 mA
Output Voltage	Maximum output voltage	24 VDC
Output Current	Continuous output current	3 A
Isolation Voltage	Isolation between input and output	3750 VAC
Leakage Current	Leakage current at output (OFF state)	0.1 渭A
Switching Time	Turn-ON time	1 ms
Turn-Off Time	Turn-OFF time	0.5 ms
Operating Temperature	Ambient temperature range for operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-40掳C to +125掳C
Humidity	Relative humidity range	5% to 95% (non-condensing)
Mounting	Mounting method	Surface mount (SMD)
Dimensions	Physical dimensions (L x W x H)	16 x 10 x 5 mm
Weight	Weight	0.5 g
Certifications	Safety and compliance certifications	UL, CE, T眉V

Instructions:

1. Installation:

   • Ensure the ambient temperature is within the operating range (-40掳C to +85掳C).
   • Mount the relay on a suitable PCB using surface mount technology (SMD).
   • Follow the PCB layout guidelines to ensure proper heat dissipation.

2. Wiring:

   • Connect the input terminals to the control circuit, ensuring the input voltage is within the specified range (20 - 24 VDC).
   • Connect the output terminals to the load, ensuring the load current does not exceed the continuous output current rating (3 A).

3. Operation:

   • Apply the input voltage to turn the relay ON.
   • Remove the input voltage to turn the relay OFF.
   • Monitor the leakage current to ensure it remains below 0.1 渭A when the relay is in the OFF state.

4. Maintenance:

   • Regularly inspect the relay for any signs of damage or wear.
   • Ensure the ambient conditions (temperature, humidity) remain within the specified limits.
   • Do not exceed the maximum ratings for voltage and current to avoid damage to the relay.

5. Safety:

   • Use appropriate protective equipment when handling the relay.
   • Ensure the relay is disconnected from power sources before performing any maintenance or testing.
   • Follow all safety guidelines and regulations for electrical components.

(For reference only)