Details

---

BUY 2SC3459 https://www.utsource.net/itm/p/12607846.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCE	-	-	80	V
Emitter-Base Voltage	VEB	-5	-	5	V
Collector Current	IC	-	150	300	mA
Base Current	IB	-	10	30	mA
Power Dissipation	PT	-	-	625	mW	TA = 25掳C
Operating Temperature	TOP	-55	-	150	掳C
Storage Temperature	TS	-65	-	150	掳C
DC Current Gain	hFE	50	200	400	-	IC = 150mA, VCE = 10V
Transition Frequency	fT	-	250	350	MHz

Instructions for Use:

1. Handling:

   • Handle the 2SC3459 with care to avoid damage to the leads or the body.
   • Use anti-static precautions to prevent damage from electrostatic discharge (ESD).

2. Mounting:

   • Ensure proper alignment of the leads during soldering.
   • Avoid excessive heat during soldering; use a temperature-controlled soldering iron.
   • Allow sufficient cooling time after soldering.

3. Biasing:

   • Ensure that the base-emitter voltage (V_BE) is within the specified limits to avoid damage.
   • Use appropriate biasing circuits to maintain stable operation.

4. Power Dissipation:

   • Do not exceed the maximum power dissipation (P_T) to prevent overheating.
   • Consider using a heatsink if operating at high power levels.

5. Temperature:

   • Operate the transistor within the specified temperature range to ensure reliable performance.
   • Monitor the temperature during operation, especially in high-power applications.

6. Storage:

   • Store the 2SC3459 in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

7. Testing:

   • Use a multimeter or transistor tester to verify the functionality of the 2SC3459 before installation.
   • Test the transistor under controlled conditions to avoid over-stressing it.

8. Troubleshooting:

   • If the transistor fails, check for short circuits, open circuits, or incorrect biasing.
   • Replace the transistor if it is found to be faulty.

(For reference only)