Details

---

BUY 2SA1263N https://www.utsource.net/itm/p/12607885.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	800	V
Emitter-Collector Voltage	VEBO	-	-	7	V
Collector-Base Voltage	VCBO	-	-	800	V
Base-Emitter Voltage	VBE	-	1.8	2.5	V
Continuous Collector Current	IC	-	-	15	A
Continuous Base Current	IB	-	-	3	A
Power Dissipation	PT	-	-	125	W
Storage Temperature	TSTG	-55	-	150	掳C
Operating Temperature	TA	-55	-	150	掳C
Transition Frequency	fT	-	10	-	MHz

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SA1263N with care to avoid mechanical stress.
   • Ensure proper heat sinking if operating at high power levels.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) according to the pin configuration.
   • Ensure that the maximum ratings are not exceeded to prevent damage.

3. Thermal Management:

   • Use a heatsink if the power dissipation exceeds the free-air rating.
   • Monitor the temperature to ensure it stays within the operating range.

4. Storage and Operation:

   • Store the device in a dry, cool place to avoid moisture damage.
   • Operate within the specified temperature range to ensure reliable performance.

5. Testing:

   • Use appropriate test equipment to measure parameters such as V_CE, I_C, and V_BE.
   • Follow safety guidelines when testing high-voltage and high-current circuits.

6. Soldering:

   • Preheat the device to reduce thermal shock during soldering.
   • Use a soldering iron with a temperature-controlled tip to avoid overheating.

7. Protection:

   • Consider using transient voltage suppressors (TVS) or Zener diodes to protect against voltage spikes.
   • Implement current limiting resistors to control base current and prevent overcurrent conditions.

(For reference only)