Details

---

BUY NJM7815A https://www.utsource.net/itm/p/12607946.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Output Voltage	Vout	No load	-	15	-	V
Line Regulation		Input voltage change	0.004	-	0.01	%/V
Load Regulation		Load current from 0 to 1A	0.01	-	0.2	%
Dropout Voltage	Vdo	Iout = 1A	-	1.7	-	V
Quiescent Current	IQ	Typical operating condition	-	8	-	mA
Ripple Rejection		1kHz	60	-	80	dB
Thermal Shutdown	TSD	Operating junction temperature	-	170	-	掳C
Short-Circuit Current	ISC	Vout shorted	-	2	-	A

Instructions for Use:

1. Installation and Mounting:

   • Ensure proper heat dissipation by mounting the NJM7815A on a heatsink if it is expected to dissipate significant power.
   • Follow standard PCB layout practices to minimize noise and improve stability.

2. Input Capacitor:

   • It is recommended to place a capacitor (typically 0.33 渭F) at the input to stabilize the regulator against input transients.

3. Output Capacitor:

   • An output capacitor (typically 0.1 渭F) should be placed close to the output terminal to ensure stability and reduce output noise.

4. Operating Temperature Range:

   • The device operates reliably within the temperature range of -40掳C to +125掳C.

5. Handling Short Circuits:

   • The NJM7815A includes internal short-circuit protection, but external fuses or current-limiting resistors may be necessary depending on the application.

6. Thermal Protection:

   • The regulator features thermal shutdown to protect against overheating. Ensure adequate cooling for continuous operation under heavy loads.

7. Voltage Regulation:

   • The NJM7815A provides a fixed output voltage of 15V. Verify that this meets your circuit requirements before installation.

8. Load Regulation:

   • Keep in mind the load regulation when designing circuits where load current varies significantly, as this can affect output voltage stability.

9. Line Regulation:

   • Consider the line regulation if the input voltage fluctuates, as this can impact the stability of the output voltage.

(For reference only)