Details

---

BUY MIP414S https://www.utsource.net/itm/p/12607947.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage
Standby Current	ISB	-	0.1	-	渭A	Current consumption in standby mode
Operating Current	IOP	-	3	-	mA	Current consumption in operating mode
Output Current	IO	-	100	-	mA	Maximum output current
Output Voltage	VO	-	3.3	-	V	Regulated output voltage (fixed)
Dropout Voltage	VD	-	120	-	mV	Voltage difference between input and output
Thermal Shutdown	TSD	-	160	-	掳C	Temperature at which the device shuts down
Operating Temperature	TOP	-40	-	85	掳C	Ambient temperature range for operation
Storage Temperature	TSTG	-40	-	125	掳C	Temperature range for storage

Instructions for Use

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Connect the VDD pin to the power source.

2. Standby Mode:

   • To enter standby mode, set the enable pin (EN) to low.
   • The device will consume approximately 0.1 渭A in this mode.

3. Operating Mode:

   • Set the enable pin (EN) to high to activate the device.
   • The device will consume approximately 3 mA in this mode.

4. Output Current (IO):

   • The maximum output current is 100 mA.
   • Ensure the load does not exceed this limit to avoid damage.

5. Output Voltage (VO):

   • The regulated output voltage is fixed at 3.3V.
   • Connect the output to the load or circuit requiring this voltage.

6. Dropout Voltage (VD):

   • The dropout voltage is typically 120 mV.
   • Ensure the input voltage is at least 120 mV higher than the output voltage for proper regulation.

7. Thermal Shutdown (TSD):

   • The device will automatically shut down if the temperature exceeds 160掳C to prevent damage.
   • Allow the device to cool down before reactivating.

8. Operating Temperature (TOP):

   • The device is designed to operate within a temperature range of -40掳C to 85掳C.
   • Avoid exposing the device to temperatures outside this range during operation.

9. Storage Temperature (TSTG):

   • The device can be stored within a temperature range of -40掳C to 125掳C.
   • Store the device in a dry, cool place to ensure longevity.

10. Handling Precautions:

    • Handle the device with care to avoid static discharge.
    • Follow proper soldering techniques to prevent thermal shock and mechanical stress.

By following these parameters and instructions, you can ensure the MIP414S operates reliably and efficiently in your application.

(For reference only)