Details

---

BUY MYAA024E-24VDC https://www.utsource.net/itm/p/12607951.html

Parameter	Description
Part Number	MYAA024E-24VDC
Type	Electromagnetic Relay
Supply Voltage	24 VDC
Coil Power	1.2 W
Coil Resistance	200 惟
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10 A @ 250 VAC, 8 A @ 30 VDC
Insulation Voltage	1000 VAC (min)
Mechanical Life	10 million operations (min)
Electrical Life	100,000 operations (resistive load)
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Weight	15 g
Dimensions	17.5 mm x 12.5 mm x 12.5 mm
Mounting	PCB mount, vertical orientation
Terminal Type	Solder lug

Instructions

1. Power Supply:

   • Ensure the supply voltage is 24 VDC.
   • Do not exceed the maximum coil power of 1.2 W.

2. Installation:

   • Mount the relay on a PCB in a vertical orientation.
   • Use appropriate soldering techniques to secure the terminals.

3. Contact Usage:

   • The relay contacts are rated for 10 A at 250 VAC or 8 A at 30 VDC.
   • Ensure the load does not exceed these ratings to prevent damage.

4. Environmental Conditions:

   • Operate the relay within the temperature range of -40掳C to +85掳C.
   • Store the relay in an environment between -40掳C and +125掳C.

5. Testing:

   • Before installation, test the relay to ensure it operates correctly.
   • Check the insulation resistance to ensure it meets the minimum requirement of 1000 VAC.

6. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it shows any signs of malfunction or if it has reached its electrical life limit.

7. Safety:

   • Always disconnect power before handling the relay.
   • Follow all local safety regulations and guidelines when installing and operating the relay.

(For reference only)