Details

---

BUY IGW75N60T G75T60 https://www.utsource.net/itm/p/12607970.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	600	V	Tj = 25掳C
Gate-Source Voltage	VGSS	-10	-	10	V
Continuous Drain Current	ID	-	75	-	A	TC = 25掳C, Pulse
Power Dissipation	PTOT	-	-	180	W	TC = 25掳C
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C
Thermal Resistance	R胃JC	-	0.8	-	掳C/W	Junction to Case
Turn-On Delay Time	td(on)	-	40	-	ns	IG = 10A, ID = 50A, VDS = 400V
Rise Time	tr	-	30	-	ns	IG = 10A, ID = 50A, VDS = 400V
Turn-Off Delay Time	td(off)	-	35	-	ns	IG = -10A, ID = 50A, VDS = 400V
Fall Time	tf	-	25	-	ns	IG = -10A, ID = 50A, VDS = 400V

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place.
   • Handle with care to avoid mechanical damage.
   • Avoid exposure to high temperatures and humidity.

2. Mounting:

   • Ensure proper heat sinking to manage thermal resistance and maintain junction temperature within safe limits.
   • Use appropriate mounting hardware and thermal interface materials to enhance heat dissipation.

3. Electrical Connections:

   • Ensure that the gate and source connections are made with low inductance paths to minimize switching losses.
   • Use short and wide traces or wires for power connections to reduce parasitic inductance.

4. Gate Drive:

   • Use a gate driver capable of providing the required gate current (I_G) to ensure fast and reliable switching.
   • Ensure the gate voltage (V_GS) is within the specified range to prevent overvoltage and damage.

5. Operating Conditions:

   • Do not exceed the maximum ratings for collector-emitter voltage (V_CEO), drain current (I_D), and power dissipation (P_TOT).
   • Monitor the junction temperature (T_J) to avoid thermal runaway.

6. Testing:

   • Perform initial testing at reduced power levels to verify correct operation and thermal management.
   • Use appropriate test equipment and procedures to measure parameters such as turn-on and turn-off times, rise and fall times, and power dissipation.

7. Safety:

   • Follow all safety guidelines and regulations when handling and operating high-voltage and high-power devices.
   • Use protective equipment such as gloves and safety glasses when necessary.

(For reference only)