Details

---

BUY C393C https://www.utsource.net/itm/p/12607974.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VDD	2.7	-	5.5	V
Output Current	IOUT	-	100	200	mA
Operating Temperature	TOPR	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C
Quiescent Current	IQ	-	10	-	渭A
Shutdown Current	ISD	-	0.1	-	渭A
Output Voltage Drop	VDROPOUT	-	0.2	-	V

Instructions for Using C393C:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 5.5V.
   • Connect the positive terminal of the power supply to the VDD pin and the negative terminal to the GND pin.

2. Output Configuration:

   • The output current (IOUT) can range from 0 to 200mA. For optimal performance, keep the output current around 100mA.
   • Connect the load between the OUT pin and GND.

3. Temperature Considerations:

   • The operating temperature (TOPR) should be maintained between -40掳C and 85掳C.
   • Store the device in an environment where the temperature ranges from -65掳C to 150掳C.

4. Quiescent and Shutdown Current:

   • The quiescent current (IQ) is typically 10渭A, which is the current consumed by the device when it is active but not driving any load.
   • The shutdown current (ISD) is typically 0.1渭A, which is the current consumed by the device when it is in the shutdown mode.

5. Output Voltage Drop:

   • The output voltage drop (VDROPOUT) is typically 0.2V. This means that the output voltage will be 0.2V less than the input voltage under typical conditions.

6. Protection Circuits:

   • The device includes built-in protection circuits such as overcurrent protection and thermal shutdown to prevent damage under fault conditions.

7. Layout Considerations:

   • Use short and wide traces for power and ground connections to minimize inductance and resistance.
   • Place decoupling capacitors close to the VDD and GND pins to filter out noise and provide stable operation.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.

9. Testing and Verification:

   • After assembly, test the device under various operating conditions to ensure it meets the specified parameters.
   • Monitor the output voltage and current to verify proper functionality.

By following these instructions, you can ensure reliable and efficient operation of the C393C component.

(For reference only)