Details

---

BUY S4010L https://www.utsource.net/itm/p/12607986.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.7	-	5.5	V	Operating supply voltage range
Quiescent Current	Iq	-	1.5	3	μA	Quiescent current at Vcc = 5V
Output Current	Iout	-	100	150	mA	Continuous output current
Dropout Voltage	Vdo	-	0.2	0.5	V	Dropout voltage at Iout = 100mA
Load Regulation	ΔVL	-	0.02	0.05	%	Load regulation from 0 to 100mA
Line Regulation	ΔVL	-	0.02	0.05	%	Line regulation from 2.7V to 5.5V
Ripple Rejection	RR	60	70	80	dB	Ripple rejection at 1kHz
Operating Temp.	Toper	-40	-	85	°C	Operating temperature range
Storage Temp.	Tstg	-65	-	150	°C	Storage temperature range

Instructions for Using the S4010L

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V.
   • Use appropriate decoupling capacitors (typically 10μF and 0.1μF) near the input pin to filter out noise and stabilize the supply.

2. Quiescent Current (Iq):

   • The quiescent current is typically 1.5μA and can go up to 3μA. This is important for low-power applications.

3. Output Current (Iout):

   • The S4010L can provide a continuous output current of up to 150mA. For reliable operation, ensure that the load does not exceed this limit.

4. Dropout Voltage (Vdo):

   • The dropout voltage is the minimum difference between the input and output voltages required for the regulator to maintain regulation. It is typically 0.2V and can go up to 0.5V at 100mA output current.

5. Load Regulation (ΔVL):

   • The load regulation is the change in output voltage when the load current changes from 0 to 100mA. It is typically 0.02% and can go up to 0.05%.

6. Line Regulation (ΔVL):

   • The line regulation is the change in output voltage when the input voltage changes from 2.7V to 5.5V. It is typically 0.02% and can go up to 0.05%.

7. Ripple Rejection (RR):

   • The ripple rejection is the ability of the regulator to reject input voltage ripple. It is typically 70dB and can range from 60dB to 80dB at 1kHz.

8. Operating Temperature (Toper):

   • The device is designed to operate in temperatures ranging from -40°C to 85°C. Ensure that the ambient temperature stays within this range for optimal performance.

9. Storage Temperature (Tstg):

   • The storage temperature range is from -65°C to 150°C. Store the device in a dry and cool environment to prevent damage.

10. Mounting and Handling:

    • Handle the device with care to avoid static discharge and mechanical damage.
    • Follow standard soldering practices and ensure that the device is not subjected to excessive heat during soldering.

11. Circuit Design:

    • Use the recommended circuit layout and components to ensure stable and efficient operation.
    • Place the output capacitor close to the output pin to minimize transient response issues.

By following these parameters and instructions, you can ensure the proper and efficient use of the S4010L voltage regulator.

(For reference only)