Details

---

BUY DH60-16A https://www.utsource.net/itm/p/12608005.html

Parameter	Description	Value
Part Number	Full Part Number	DH60-16A
Type	Relay Type	SPDT (Single Pole, Double Throw)
Coil Voltage	Operating Voltage of Coil	24V DC
Coil Current	Operating Current of Coil	40mA
Contact Rating	Maximum Switching Capacity	16A at 250V AC
Contact Resistance	Resistance of Contacts (max)	50m惟
Insulation Resistance	Minimum Insulation Resistance	100M惟 at 500V DC
Dielectric Strength	Dielectric Strength Between Contacts and Coil	1500V AC for 1 minute
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Mechanical Life	Mechanical Life (min)	10 million operations
Electrical Life	Electrical Life (min)	100,000 operations
Weight	Weight of Relay	30g

Instructions for Use

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface using the provided mounting holes.

2. Wiring:

   • Connect the coil terminals to the appropriate power supply (24V DC).
   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • When the coil is energized, the relay will switch from the NC to the NO contact.
   • When the coil is de-energized, the relay will return to its default state (NC).

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry cloth to remove dust and debris.

5. Safety Precautions:

   • Do not exceed the maximum ratings specified in the table.
   • Ensure the relay is disconnected from the power source before performing any maintenance or wiring changes.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)