Details

---

BUY BUT34 https://www.utsource.net/itm/p/12608014.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage (Reverse)	V(BR)CEO	-	-	600	V
Emitter-Collector Voltage (Reverse)	V(BR)EBO	-	-	700	V
Collector Current (Continuous)	IC	-	-	8	A
Collector Current (Pulse)	ICM	-	-	15	A
Power Dissipation	Ptot	-	-	125	W
Junction Temperature	Tj	-55	-	150	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Transition Frequency	fT	-	2.5	-	MHz
Forward Transconductance	gfs	-	25	-	S

Instructions for Use:

1. Mounting and Handling:

   • Handle the BUT34 with care to avoid damage to the leads and the device.
   • Ensure proper heat sinking when operating at high power levels to maintain junction temperature within safe limits.

2. Electrical Connections:

   • Connect the collector (C), base (B), and emitter (E) terminals correctly.
   • Ensure that the maximum ratings for voltage and current are not exceeded.

3. Thermal Management:

   • Use a suitable heatsink to dissipate heat effectively, especially when operating at or near the maximum power dissipation.
   • Monitor the junction temperature to prevent overheating.

4. Biasing:

   • Properly bias the base to ensure stable operation and avoid saturation or cutoff conditions.
   • Use appropriate resistors to limit base current and protect the transistor from overdrive.

5. Storage and Operating Conditions:

   • Store the device in a dry, cool place away from direct sunlight.
   • Operate the device within the specified temperature range to ensure reliable performance.

6. Testing and Troubleshooting:

   • Use a multimeter or an oscilloscope to test the device parameters.
   • If the device fails, check for short circuits, open circuits, or incorrect connections.

7. Safety Precautions:

   • Always disconnect power before making any changes to the circuit.
   • Use appropriate personal protective equipment (PPE) when handling high-voltage circuits.

(For reference only)