Details

---

BUY SMK1060 https://www.utsource.net/itm/p/12608028.html

Parameter	Description	Value
Part Number	Component Identifier	SMK1060
Type	Component Type	Surface Mount Inductor
Frequency Range	Operating Frequency	10 MHz to 600 MHz
Inductance	Nominal Inductance	10 nH, 22 nH, 33 nH, 47 nH, 68 nH, 100 nH
Tolerance	Inductance Tolerance	卤5%
DC Resistance (max)	Maximum DC Resistance at 20掳C	0.01 惟 to 0.1 惟 (varies by inductance)
Q Factor (min)	Minimum Q Factor at 100 MHz	30 to 50 (varies by inductance)
Self-Resonant Frequency (SRF)	Self-Resonant Frequency	1 GHz to 2 GHz (varies by inductance)
Current Rating	Maximum Continuous Current	1.5 A to 3.0 A (varies by inductance)
Temperature Range	Operating Temperature	-55掳C to +125掳C
Package Size	Physical Dimensions	1.0 mm x 0.6 mm x 0.5 mm
Termination	Soldering Type	SMD (Surface Mount Device)
RoHS Compliance	Environmental Standard	RoHS Compliant

Instructions for Use:

1. Handling and Storage:

   • Store the components in a dry, cool place to prevent moisture damage.
   • Handle with care to avoid mechanical stress or damage to the terminals.

2. Soldering:

   • Use a soldering iron with a temperature setting between 260掳C and 300掳C.
   • Ensure the soldering process is completed within 3 seconds to avoid thermal shock.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Place the component on the PCB with the correct orientation as indicated by the silkscreen.
   • Ensure the component is securely attached to the PCB without any misalignment.

4. Testing:

   • Verify the inductance value using an LCR meter to ensure it meets the specified tolerance.
   • Check the DC resistance and Q factor to ensure they are within the specified range.

5. Environmental Considerations:

   • Ensure the operating environment does not exceed the specified temperature range.
   • Avoid exposing the component to corrosive environments or high humidity levels.

6. Design Considerations:

   • Use the component in circuits where high-frequency performance and low DC resistance are critical.
   • Consider the self-resonant frequency (SRF) when designing the circuit to avoid resonance issues.

7. Safety:

   • Follow all safety guidelines and regulations when handling and using the component.
   • Dispose of any defective components according to local environmental regulations.

(For reference only)