Details

---

BUY 3P4J https://www.utsource.net/itm/p/12608032.html

Parameter	Description	Value
Type	Relay	3P4J
Number of Poles	Number of independent circuits controlled	3
Contacts	Type of contacts (Form)	DPDT (Double Pole Double Throw)
Coil Voltage	Voltage required to energize the relay coil	24V DC
Coil Current	Current drawn by the coil when energized	18mA
Contact Rating	Maximum current and voltage the contacts can handle	10A at 250V AC
Insulation Resistance	Resistance between contacts and coil	>100M惟
Dielectric Strength	Voltage the insulation can withstand without breakdown	1500V AC
Mechanical Life	Number of operations before failure	10 million cycles
Electrical Life	Number of operations under load before failure	100,000 cycles
Operating Temperature	Range of temperatures for reliable operation	-40掳C to +85掳C
Storage Temperature	Range of temperatures for storage	-40掳C to +125掳C
Weight	Weight of the relay	30g
Dimensions	Physical size of the relay	22.5mm x 13.5mm x 16.5mm

Instructions for Use:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature range.
   • Mount the relay securely to prevent mechanical stress on the terminals.

2. Wiring:

   • Connect the coil terminals to the appropriate power supply (24V DC).
   • Connect the load to the contact terminals according to the desired circuit configuration (DPDT).

3. Operation:

   • When the coil is energized, the relay contacts will switch from their normal state to the energized state.
   • Ensure the load does not exceed the contact rating to avoid damage.

4. Testing:

   • Test the relay by applying the coil voltage and verifying the contact switching.
   • Check the continuity of the contacts using a multimeter.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it fails to operate correctly or shows signs of degradation.

6. Storage:

   • Store the relay in a dry, cool place within the specified storage temperature range.
   • Avoid exposure to corrosive substances and excessive humidity.

(For reference only)