Details

---

BUY D4511BAC https://www.utsource.net/itm/p/12608038.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	-	5.5	V
Output Current	Iout	-	20	-	mA
Input Voltage	Vin	0	-	5	V
Operating Temp.	Toper	-40	-	85	掳C
Storage Temp.	Tstg	-65	-	150	掳C
Propagation Delay	tpd	-	100	-	ns
Power Dissipation	Pd	-	100	-	mW

Instructions for Use:

1. Supply Voltage (Vcc): Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.
2. Output Current (Iout): The maximum output current should not exceed 20mA to prevent overheating or failure.
3. Input Voltage (Vin): Input voltages should be between 0V and 5V to ensure proper operation.
4. Operating Temperature (Toper): The device is designed to operate within a temperature range of -40掳C to 85掳C. Operating outside this range may affect performance.
5. Storage Temperature (Tstg): Store the device in an environment where temperatures range from -65掳C to 150掳C to prevent degradation.
6. Propagation Delay (tpd): The typical propagation delay is 100ns. This is the time it takes for a change in input to result in a corresponding change in output.
7. Power Dissipation (Pd): The maximum power dissipation is 100mW. Ensure adequate heat dissipation if operating near this limit to maintain reliability.

Handling and Storage:

• ESD Protection: Handle the device with care to avoid electrostatic discharge (ESD) damage. Use ESD-safe tools and work surfaces.
• Moisture Sensitivity: Store the device in a dry environment to prevent moisture-related issues. Follow recommended reflow soldering profiles if the device is moisture-sensitive.
• Soldering: Use appropriate soldering techniques and temperatures to avoid thermal shock and damage to the device.

(For reference only)