Details

---

BUY MC14528BCP https://www.utsource.net/itm/p/12608047.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	3.0	-	18	V
Input Voltage	VI	Low Level	0	-	0.8	V
Input Voltage	VI	High Level	2.0	-	VCC	V
Output Voltage	VO	Low Level	0	-	0.4	V
Output Voltage	VO	High Level	2.4	-	VCC	V
Input Current	II	Low Level	-1	-	10	渭A
Input Current	II	High Level	-10	-	1	渭A
Output Current	IO	Low Level	-10	-	-	mA
Output Current	IO	High Level	-	-	10	mA
Propagation Delay Time	tpd	Typical	-	10	-	ns
Power Dissipation	PD	Maximum	-	-	720	mW
Operating Temperature	TA	Commercial	0	-	70	掳C
Operating Temperature	TA	Industrial	-40	-	85	掳C
Storage Temperature	TSTG	-	-65	-	150	掳C

Instructions for Using MC14528BCP

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the operating range of 3.0V to 18V.
   • Connect the ground (GND) pin to a stable reference point.

2. Input Signals:

   • For low-level input, ensure the voltage is between 0V and 0.8V.
   • For high-level input, ensure the voltage is between 2.0V and V_CC.
   • Keep input currents within the specified limits to avoid damage.

3. Output Signals:

   • For low-level output, the voltage will be between 0V and 0.4V.
   • For high-level output, the voltage will be between 2.4V and V_CC.
   • Ensure the output current does not exceed the maximum ratings to prevent damage.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 10ns. This is important for timing considerations in your circuit.

5. Temperature Considerations:

   • Operate the device within the specified temperature ranges:
     • Commercial: 0掳C to 70掳C
     • Industrial: -40掳C to 85掳C
   • Store the device within the storage temperature range of -65掳C to 150掳C.

6. Power Dissipation:

   • Ensure the power dissipation (P_D) does not exceed 720mW to avoid overheating and potential damage.

7. Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections without causing thermal stress.

By following these guidelines, you can ensure the optimal performance and longevity of the MC14528BCP.

(For reference only)