Details

---

BUY AS5430AD/TR-LF https://www.utsource.net/itm/p/12608089.html

Parameter	Description	Value	Unit
Supply Voltage	Operating voltage range	2.7 to 5.5	V
Output Type	Output configuration	Push-pull	-
Communication Interface	Interface type	SPI, I2C	-
Resolution	Magnetic angle resolution	14-bit	-
Operating Temperature	Temperature range for operation	-40 to 150	掳C
Package Type	Encapsulation	TSSOP-16	-
Maximum Current	Supply current	8	mA
Magnetic Field Range	Operational magnetic field strength	卤150	Gauss

Instructions for AS5430AD/TR-LF:

1. Power Supply Connection:

   • Connect the supply voltage (VCC) between 2.7V and 5.5V to pin 16.
   • Ground (GND) should be connected to pin 8.

2. Communication Setup:

   • For SPI communication, connect MOSI, MISO, SCLK, and CS pins appropriately.
   • For I2C communication, connect SDA and SCL pins as per the interface requirements.

3. Magnetic Sensor Positioning:

   • Ensure the sensor is positioned within the operational magnetic field range of 卤150 Gauss for accurate readings.

4. Operating Environment:

   • The device can operate in environments ranging from -40掳C to 150掳C. Ensure that the operating temperature does not exceed these limits.

5. Resolution Configuration:

   • The device supports a 14-bit resolution for magnetic angle measurement, providing precise angular position data.

6. Current Considerations:

   • Keep the supply current under 8mA to avoid overheating or damaging the component.

7. Handling Precautions:

   • Handle the AS5430AD/TR-LF with care, especially during soldering, to prevent damage from electrostatic discharge or excessive heat.

(For reference only)