Details

---

BUY SKW25N120 https://www.utsource.net/itm/p/12608125.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	-	1200	V	Maximum voltage between drain and source
Gate-Source Voltage	VGS	-15	-	20	V	Maximum voltage between gate and source
Continuous Drain Current	ID	-	25	-	A	Continuous current through the drain
Pulse Drain Current	IDpeak	-	140	-	A	Peak pulse current through the drain
Power Dissipation	PTOT	-	-	300	W	Total power dissipation
Junction Temperature	TJ	-55	-	175	掳C	Operating junction temperature range
Storage Temperature	TSTG	-55	-	150	掳C	Storage temperature range
Thermal Resistance	R胃JC	-	0.8	-	K/W	Junction to case thermal resistance

Instructions for Use

1. Handling Precautions:

   • Handle the SKW25N120 with care to avoid static discharge which can damage the MOSFET.
   • Ensure all connections are secure and properly insulated to prevent short circuits.

2. Mounting:

   • Mount the device on a heatsink if operating near or at maximum power dissipation to ensure proper heat dissipation.
   • Use thermal paste between the device and the heatsink to improve thermal conductivity.

3. Biasing:

   • Apply the gate-source voltage (V_GS) within the specified limits to avoid damaging the MOSFET.
   • Ensure the gate is properly biased to control the drain current (I_D).

4. Current Limiting:

   • Do not exceed the continuous drain current (I_D) or pulse drain current (I_Dpeak) ratings to prevent overheating and potential failure.
   • Use appropriate current limiting resistors if necessary.

5. Temperature Monitoring:

   • Monitor the junction temperature (T_J) to ensure it stays within the safe operating range.
   • If the device is operating in a high-temperature environment, consider additional cooling measures.

6. Storage:

   • Store the SKW25N120 in a dry, cool place away from direct sunlight and sources of heat.
   • Follow the storage temperature range (T_STG) to avoid damage.

7. Testing:

   • Before installing the MOSFET in a circuit, test its parameters using a multimeter or a dedicated MOSFET tester to ensure it meets the specified values.

8. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) such as gloves and safety glasses.

(For reference only)