Details

---

BUY LS05-15B12SS https://www.utsource.net/itm/p/12608130.html

Parameter	Description	Value
Part Number	Component Identifier	LS05-15B12SS
Type	Relay Type	SPDT (Single Pole Double Throw)
Coil Voltage	Voltage Required to Operate the Coil	12V DC
Coil Current	Current Drawn by the Coil	38mA
Contact Form	Configuration of the Relay Contacts	SPDT
Contact Rating	Maximum Current and Voltage the Contacts Can Handle	10A at 250V AC
Switching Capacity	Maximum Power the Relay Can Switch	2500VA
Insulation Resistance	Resistance Between Contacts and Coil	>100M惟 at 500V DC
Dielectric Strength	Voltage the Relay Can Withstand Without Breakdown	1500V AC for 1 minute
Mechanical Life	Number of Operations Before Failure (No Load)	10,000,000 cycles
Electrical Life	Number of Operations Before Failure (Rated Load)	100,000 cycles
Operating Temperature	Range of Ambient Temperatures Where the Relay Can Function	-40掳C to +85掳C
Storage Temperature	Range of Temperatures for Storage	-40掳C to +125掳C
Weight	Mass of the Relay	15g
Dimensions	Physical Size of the Relay	17.5mm x 12.5mm x 12.5mm

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use appropriate mounting hardware to secure the relay.
   • Connect the coil terminals to the control circuit using wires rated for the coil current.

2. Wiring:

   • Connect the common (COM) terminal to the power source or load.
   • Connect the normally open (NO) and normally closed (NC) terminals to the respective parts of the circuit you want to control.
   • Ensure all connections are tight and secure to prevent arcing or loose connections.

3. Operation:

   • Apply the rated coil voltage to activate the relay. The contacts will switch from NC to NO.
   • Remove the coil voltage to deactivate the relay. The contacts will return to their default position (NC).

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay with a dry, soft cloth to remove dust and debris.
   • Replace the relay if it shows signs of failure or does not meet performance specifications.

5. Safety:

   • Do not exceed the maximum ratings for voltage, current, and power.
   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Use appropriate fuses or circuit breakers to protect the circuit from overcurrent conditions.

(For reference only)