Details

---

BUY SI8660BB-B-IS1R https://www.utsource.net/itm/p/12608135.html

Parameter	Description	Value/Range
Device Type	Isolated Gate Driver	SI8660BB-B-IS1R
Isolation Voltage	Maximum working voltage across the isolation barrier	5.7 kVrms
Propagation Delay	Time delay from input to output	45 ns typical
Common-Mode Transient Immunity (CMTI)	Ability to withstand fast-changing common-mode voltages without erroneous operation	卤100 kV/渭s typical
Operating Temperature Range	Temperature range for reliable operation	-40掳C to +125掳C
Supply Voltage (VDD1/VDD2)	Operating voltage range for supply rails	4.5 V to 5.5 V
Output Current	Peak current capability of the driver outputs	卤4 A peak
Quiescent Current	Current consumed by the device when not driving	3 mA typical
Input Logic High Voltage	Minimum voltage recognized as a high logic level at the input	2.0 V typical
Input Logic Low Voltage	Maximum voltage recognized as a low logic level at the input	0.8 V typical
Package Type	Physical package used	SOIC-16

Instructions for Use:

1. Power Supply Configuration: Ensure that both VDD1 and VDD2 are supplied with appropriate voltages within the specified range. These supplies must be stable and properly decoupled with capacitors close to the device.

2. Signal Input Handling: Connect your control signals to the IN pin. Ensure that signal levels meet the input logic high and low voltage specifications.

3. Output Connections: Connect the HS and LS pins to the gate of the MOSFET or IGBT you intend to drive. Be mindful of the peak current ratings and ensure the layout minimizes parasitic inductance.

4. Isolation Considerations: Given the high isolation voltage, ensure proper PCB layout practices to maintain safety and performance. Keep high-voltage traces away from low-voltage areas.

5. Thermal Management: The device is rated for operation up to 125掳C. If operating near this limit, consider thermal management techniques such as heatsinking or airflow.

6. Testing and Validation: Before deploying in critical applications, validate the setup under all expected operating conditions, paying special attention to CMTI and propagation delay characteristics.

7. Safety Standards Compliance: Verify that the application meets relevant safety standards, especially concerning electrical isolation requirements.

(For reference only)