Details
BUY 1N4004. https://www.utsource.net/itm/p/12608143.html
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Peak Repeating Reverse Voltage | V_RRM | - | 400 | - | V |
| Maximum RMS Voltage (at T_A = 25掳C) | V_RM | - | 280 | - | V |
| Average Rectified Forward Current (T_A = 25掳C, Rth = 50掳C/W) | I_F(AV) | - | 1.0 | - | A |
| Non-Repetitive Peak Surge Current (T_J = 25掳C, 1/2 sine-wave, 8.3 ms duration) | I_SM | - | 30 | - | A |
| Forward Voltage Drop (I_F = 1A, T_J = 25掳C) | V_F | - | 1.1 | - | V |
| Reverse Leakage Current (V_R = 400V, T_J = 25掳C) | I_R | - | 5 | - | 渭A |
| Junction Operating Temperature Range | T_J | -55 | - | 150 | 掳C |
| Storage Temperature Range | T_STG | -65 | - | 150 | 掳C |
Instructions for Use:
Mounting and Handling:
- Handle the diode with care to avoid mechanical damage.
- Ensure that the diode is mounted with adequate heat sinking if operating at high currents.
Electrical Connections:
- Connect the anode to the positive side of the circuit and the cathode to the negative side.
- Ensure that the peak reverse voltage does not exceed 400V to prevent breakdown.
Thermal Management:
- For continuous operation at the maximum average forward current, ensure that the junction temperature does not exceed 150掳C.
- Use a heatsink if necessary to maintain the junction temperature within safe limits.
Surge Currents:
- The diode can handle non-repetitive surge currents up to 30A for short durations (8.3 ms).
- Avoid exceeding these surge current ratings to prevent damage.
Storage:
- Store the diode in a dry place within the temperature range of -65掳C to 150掳C.
Testing:
- When testing the diode, ensure that the test conditions do not exceed the maximum ratings specified in the table.
- Use appropriate test equipment to measure forward voltage drop and reverse leakage current.
Environmental Considerations:
- The diode should be used in environments where it will not be exposed to excessive humidity or corrosive gases.
Compliance:
- Ensure that the diode complies with all relevant safety and regulatory standards for the application.
View more about 1N4004. on main site
