Details

---

BUY 88E1510-A0-NNB2I000 https://www.utsource.net/itm/p/12608147.html

Parameter	Description	Value
Part Number	Full part number	88E1510-A0-NNB2I000
Manufacturer	Manufacturer of the component	Marvell
Package Type	Type of package	QFN-48 (7x7)
Operating Temperature	Range of operating temperatures	-40掳C to +85掳C
Supply Voltage	Range of supply voltages	3.3V 卤 5%
Data Rate	Maximum data rate supported	10/100/1000 Mbps
Interface	Interface type	MII/RMII/SGMII
PHY Mode	Supported PHY modes	10BASE-T, 100BASE-TX, 1000BASE-T
MAC Interface	MAC interface type	RGMII
LED Support	Number of LEDs supported	4
Power Consumption	Typical power consumption	300 mW
ESD Protection	Electrostatic discharge protection	卤2 kV HBM
RoHS Compliance	Compliance with RoHS standards	Yes
Lead-Free	Lead-free status	Yes

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage is within the specified range of 3.3V 卤 5%.
   • Use a stable power source to avoid voltage fluctuations.

2. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.
   • Provide adequate cooling if the device is expected to operate in high-temperature environments.

3. Signal Integrity:

   • Use controlled impedance traces for the differential pairs (e.g., RGMII) to maintain signal integrity.
   • Keep signal lines as short as possible to minimize noise and crosstalk.

4. LED Configuration:

   • Configure the LEDs according to the application requirements using the appropriate registers.
   • Refer to the datasheet for specific register settings.

5. Firmware/Software:

   • Initialize the device using the provided firmware or software drivers.
   • Follow the initialization sequence outlined in the datasheet to ensure proper operation.

6. Testing and Validation:

   • Perform functional tests to verify the correct operation of the device.
   • Use diagnostic tools and commands to monitor and troubleshoot the device during testing.

7. Handling and Storage:

   • Handle the device with care to avoid damage from ESD.
   • Store the device in a dry, cool place away from direct sunlight and extreme temperatures.

For more detailed information, refer to the datasheet and application notes provided by Marvell.

(For reference only)