Details

---

BUY G8TB-1A-64E-12V https://www.utsource.net/itm/p/12608155.html

Parameter	Value
Part Number	G8TB-1A-64E-12V
Type	Relay
Coil Voltage	12V DC
Coil Current	33.5mA (max)
Coil Power	0.4W (max)
Contact Form	SPDT (Single Pole Double Throw)
Contact Rating	10A, 250V AC
Contact Resistance	50m惟 (max)
Insulation Resistance	100M惟 (min) at 500V DC
Dielectric Strength	2500V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Mechanical Life	10 million operations
Electrical Life	100,000 operations
Mounting	PCB mount
Dimensions (L x W x H)	17.5mm x 12.2mm x 12.2mm
Weight	3.5g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a suitable PCB with appropriate spacing.
   • Solder the relay to the PCB using standard soldering techniques. Avoid excessive heat to prevent damage.

2. Coil Connection:

   • Connect the coil terminals to the 12V DC power supply.
   • Ensure the polarity is correct to avoid damage to the relay.

3. Contact Connection:

   • Connect the load to the normally open (NO) and common (COM) contacts for switching the load on.
   • Connect the load to the normally closed (NC) and common (COM) contacts for switching the load off.

4. Operation:

   • When the coil is energized, the NO contact will close, and the NC contact will open.
   • When the coil is de-energized, the NO contact will open, and the NC contact will close.

5. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Ensure the operating environment is within the specified temperature range to maintain reliability.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and corrosive substances.

7. Safety:

   • Do not exceed the maximum ratings specified in the parameter table.
   • Use appropriate fuses or circuit breakers to protect against overcurrent conditions.

(For reference only)