Details

---

BUY MCR22-8 https://www.utsource.net/itm/p/12608160.html

Parameter	Description	Value
Part Number	Full part number	MCR22-8
Type	Component type	Surface Mount Relay
Package	Package type	DIP-8
Coil Voltage	Operating voltage for the relay coil	5V, 12V, 24V
Coil Current	Current required to energize the relay	30mA (at 5V)
Contact Form	Configuration of the relay contacts	SPDT
Contact Rating	Maximum current and voltage for contacts	5A, 250VAC
Insulation Resistance	Minimum resistance between contacts and coil	100M惟 at 500VDC
Dielectric Strength	Voltage withstand capability	1500VAC (1 minute)
Operating Temperature	Range of temperatures for operation	-40掳C to +85掳C
Storage Temperature	Range of temperatures for storage	-55掳C to +125掳C
Weight	Weight of the component	6g

Instructions

1. Handling and Storage:

   • Store the relay in a dry, clean environment.
   • Avoid exposure to high humidity, corrosive gases, or extreme temperatures.

2. Mounting:

   • Ensure the PCB is clean and free from contaminants before mounting.
   • Use appropriate soldering techniques to avoid overheating the relay.
   • Allow sufficient space around the relay for heat dissipation.

3. Wiring:

   • Connect the coil terminals to the control circuit according to the specified coil voltage.
   • Connect the contact terminals to the load circuit ensuring the current and voltage ratings are not exceeded.

4. Testing:

   • Test the relay using a multimeter to verify continuity and insulation resistance.
   • Apply the rated coil voltage to test the switching function.

5. Operation:

   • Ensure the relay is operated within the specified temperature range.
   • Regularly inspect the relay for signs of wear or damage.

6. Safety:

   • Follow all safety guidelines when handling and testing the relay.
   • Use appropriate personal protective equipment (PPE) as needed.

7. Disposal:

   • Dispose of the relay in accordance with local environmental regulations.

(For reference only)