Details

---

BUY KC-256A https://www.utsource.net/itm/p/12608163.html

Parameter	Description	Value
Part Number	KC-256A
Type	Relay
Package Type	DIP-16
Coil Voltage	Operating Voltage	5V, 12V, 24V DC
Coil Current	Operating Current	30mA (at 5V)
Contact Form	Number of Poles and Throws	8PDT (8 Form C)
Contact Rating	Maximum Switching Capacity	10A at 250V AC
Insulation Resistance	Between Contacts and Coil	>100M惟 at 500V DC
Dielectric Strength	Between Contacts and Coil	1500V AC for 1 minute
Operating Temperature	Range	-40掳C to +85掳C
Storage Temperature	Range	-40掳C to +125掳C
Mechanical Life	Minimum	10 million operations
Electrical Life	Minimum (at rated load)	100,000 operations
Weight	Approximate	25g

Instructions for Use

1. Installation:

   • Ensure the relay is mounted on a suitable PCB or chassis.
   • Follow the pinout diagram provided to connect the relay correctly.

2. Power Supply:

   • Connect the coil terminals to the appropriate power supply voltage (5V, 12V, or 24V DC).
   • Ensure the power supply can provide the required current to operate the relay.

3. Load Connection:

   • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as per the application requirements.
   • Do not exceed the maximum contact rating of 10A at 250V AC.

4. Testing:

   • Apply the operating voltage to the coil to test the relay operation.
   • Verify that the contacts switch as expected using a multimeter or continuity tester.

5. Environmental Considerations:

   • Operate the relay within the specified temperature range (-40掳C to +85掳C).
   • Store the relay in a dry environment within the storage temperature range (-40掳C to +125掳C).

6. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Replace the relay if it fails to operate correctly or if any physical damage is observed.

7. Safety Precautions:

   • Always disconnect power before performing any maintenance or testing.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)