Details

---

BUY BA282-TAP https://www.utsource.net/itm/p/12608179.html

Parameter	Description	Value
Part Number	Part number of the device	BA282-TAP
Type	Type of component	Power MOSFET
Polarity	Polarity of the MOSFET	N-Channel
VDS	Drain-to-Source Voltage	200 V
VGS	Gate-to-Source Voltage	卤20 V
ID	Continuous Drain Current (at 25掳C)	1.4 A
RDS(on)	On-State Resistance (at VGS = 10 V)	1.6 惟
Power Dissipation	Maximum Power Dissipation (at 25掳C)	2.8 W
Operating Temperature	Operating Temperature Range	-55掳C to +150掳C
Package	Package type	TO-220
Lead Finish	Lead finish type	Tin-Plated

Instructions for Use:

1. Handling Precautions:

   • Handle the BA282-TAP with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.

2. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Apply thermal compound between the device and heat sink to improve thermal performance.
   • Tighten the mounting screws to the recommended torque value to ensure good thermal contact without causing mechanical stress.

3. Soldering:

   • Preheat the device to reduce thermal shock.
   • Use a soldering iron with a temperature of 350掳C 卤 10掳C.
   • Solder each lead for no more than 3 seconds.
   • Allow the device to cool naturally after soldering.

4. Circuit Design:

   • Ensure that the V_DS and I_D ratings are not exceeded during operation.
   • Use appropriate gate drive circuits to ensure reliable switching.
   • Consider adding snubber circuits to protect against voltage spikes.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to prevent damage.

6. Testing:

   • Use a multimeter or an oscilloscope to verify the functionality of the device.
   • Test the device under controlled conditions to ensure it meets the specified parameters.

7. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Use protective equipment such as gloves and safety glasses when handling the device.

By following these instructions, you can ensure the reliable and safe operation of the BA282-TAP power MOSFET.

(For reference only)