Details

---

BUY NCP1250BP65G https://www.utsource.net/itm/p/12608183.html

Parameter	Description	Value	Unit
Input Voltage (Min)	Minimum input voltage	8	V
Input Voltage (Max)	Maximum input voltage	65	V
Output Current (Max)	Maximum output current	1.2	A
Switching Frequency	Switching frequency of the device	130	kHz
Quiescent Current	Quiescent current	70	渭A
Efficiency	Efficiency at typical operating conditions	Up to 90	%
Operating Temperature	Operating temperature range	-40 to 125	掳C
Package Type	Package type	SOIC-8
Protection Features	Built-in protection features	Overcurrent,
		Overtemperature

Instructions for NCP1250BP65G:

1. Power Supply Connection: Connect the input power supply within the specified input voltage range (8V to 65V). Ensure proper polarity.

2. Output Configuration: Set up the output circuitry to handle the maximum output current of 1.2A. Use appropriate capacitors and inductors as per the application note.

3. Heat Dissipation: Given the operating temperature range (-40掳C to 125掳C), ensure adequate heat dissipation, especially under high load conditions.

4. Protection Circuits: Utilize the built-in overcurrent and overtemperature protection features to safeguard the device against potential faults.

5. Switching Frequency Adjustment: The device operates at a fixed switching frequency of 130kHz. Verify that this frequency is suitable for your application to avoid noise issues.

6. Quiescent Current Consideration: Be aware of the quiescent current of 70渭A when designing low-power systems.

7. Efficiency Optimization: To achieve the highest efficiency, operate the device under conditions where it can reach up to 90% efficiency.

8. Package Handling: Handle the SOIC-8 package carefully during installation to avoid damage to the pins or the component itself.

For detailed design considerations and specific application circuits, refer to the datasheet provided by the manufacturer.

(For reference only)