Details

---

BUY MJL21194G https://www.utsource.net/itm/p/12608191.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCE(O)	-	-	600	V	IC = 0, TA = 25掳C
Emitter-Base Voltage	VEB(O)	-	-	7	V	IE = 0, TA = 25掳C
Collector Current	IC	-	15	-	A	Continuous, TC = 25掳C
Power Dissipation	PT	-	-	115	W	TC = 25掳C
Storage Temperature Range	TSTG	-55	-	150	掳C	-
Operating Junction Temperature	TJ	-55	-	150	掳C	-
Base-Emitter Saturation Voltage	VBE(sat)	1.8	2.2	2.6	V	IC = 15A, IB = 1.5A, TA = 25掳C
Collector-Emitter Saturation Voltage	VCE(sat)	1.2	1.6	2.0	V	IC = 15A, IB = 1.5A, TA = 25掳C
Transition Frequency	fT	-	2.5	-	MHz	IC = 1A, VCE = 10V, TA = 25掳C
Storage Time	tstg	-	300	-	ns	IC = 15A, VCE = 10V, TA = 25掳C

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use recommended mounting torque for the screw terminals to avoid damage.

2. Biasing:

   • Ensure the base-emitter voltage (V_BE) is within the specified limits to avoid saturation or cutoff conditions.
   • Use appropriate base resistors to control the base current (I_B) and prevent excessive collector current (I_C).

3. Power Dissipation:

   • Monitor the power dissipation (P_T) to ensure it does not exceed the maximum rating.
   • Consider derating the power dissipation at higher ambient temperatures to prevent overheating.

4. Storage and Handling:

   • Store the device in a dry environment within the specified storage temperature range.
   • Handle with care to avoid mechanical stress and static discharge.

5. Testing:

   • Perform initial testing under controlled conditions to verify the device parameters.
   • Use appropriate test equipment and procedures to avoid damaging the device during testing.

6. Safety:

   • Always follow safety guidelines when working with high voltages and currents.
   • Ensure proper insulation and grounding to prevent electrical hazards.

(For reference only)