Details

---

BUY 2SC2682-Y https://www.utsource.net/itm/p/12608240.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCE	-	-	100	V
Emitter-Base Voltage	VEB	-	-	5	V
Collector Current	IC	-	-	1.5	A
Base Current	IB	-	-	0.15	A
Power Dissipation	PT	-	-	45	W
Transition Frequency	fT	-	300	-	MHz
Storage Temperature	TSTG	-55	-	150	掳C
Operating Temperature	TOP	-55	-	150	掳C

Instructions for Use:

1. Mounting:

   • Ensure that the transistor is mounted on a heatsink if operating near its maximum power dissipation to prevent overheating.
   • Use thermal compound between the transistor and heatsink for better heat transfer.

2. Biasing:

   • Set the base current (I_B) to ensure proper operation within the safe operating area (SOA) of the transistor.
   • Avoid excessive base current to prevent damage to the transistor.

3. Voltage Ratings:

   • Do not exceed the maximum collector-emitter voltage (V_CE) or emitter-base voltage (V_EB) ratings.
   • Ensure that the supply voltage is within the specified limits to avoid breakdown.

4. Current Handling:

   • The maximum collector current (I_C) should not be exceeded to prevent thermal runaway and potential damage.
   • Use appropriate current limiting resistors if necessary.

5. Frequency Considerations:

   • The transition frequency (f_T) indicates the maximum frequency at which the transistor can operate effectively. Design circuits considering this parameter to ensure stable performance.

6. Temperature Management:

   • Monitor the operating temperature (T_OP) to ensure it remains within the specified range.
   • Avoid prolonged operation at extreme temperatures to prolong the life of the transistor.

7. Storage:

   • Store the transistor in a dry, cool place away from direct sunlight and sources of heat.
   • Handle with care to avoid mechanical damage or static discharge.

8. Testing:

   • Before installing the transistor in a circuit, test its parameters using a multimeter or a transistor tester to ensure it meets the specifications.
   • Verify the correct pinout (E, B, C) to avoid incorrect connections.

(For reference only)