Details

---

BUY BY299-60 https://www.utsource.net/itm/p/12608269.html

Parameter	Description	Value	Unit
Part Number	Device Part Number	BY299-60	-
Type	Device Type	Relay	-
Coil Voltage	Operating Voltage of the Coil	24	VDC
Coil Power	Power Consumption of the Coil	1.4	W
Contact Form	Configuration of Contacts	SPDT	-
Contact Rating	Maximum Switching Capacity	10	A
Insulation Voltage	Dielectric Strength Between Coil and Contacts	1500	VAC
Operating Temp	Temperature Range for Operation	-40 to +85	掳C
Weight	Weight of the Relay	70	g

Instructions for Use:

1. Installation:

   • Ensure the relay is installed in a clean, dry environment.
   • Mount the relay on a flat surface using the provided mounting holes.

2. Electrical Connection:

   • Connect the coil terminals to the appropriate power supply matching the rated coil voltage.
   • Wire the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.

3. Operation:

   • Apply the rated voltage to the coil to energize the relay and switch the contacts.
   • Ensure not to exceed the contact rating to prevent damage.

4. Maintenance:

   • Regularly inspect connections for tightness and corrosion.
   • Avoid exposing the relay to excessive dust or moisture to maintain performance.

5. Safety Precautions:

   • Do not exceed the insulation voltage to prevent electrical shock.
   • Disconnect power before performing any maintenance or installation procedures.

(For reference only)