Details

---

BUY MK4116N-2 https://www.utsource.net/itm/p/12608277.html

Parameter	Description	Value
Part Number	Full Part Number	MK4116N-2
Type	Device Type	CMOS Static RAM
Organization	Organization	16K x 8 bits
Access Time (tAC)	Access Time	15 ns
Cycle Time (tCYC)	Cycle Time	20 ns
Supply Voltage (VCC)	Operating Supply Voltage Range	4.5 V to 5.5 V
Standby Current (ISB)	Standby Current	10 渭A (max)
Active Current (IAV)	Active Current	30 mA (max)
Package	Package Type	28-Pin Plastic DIP
Operating Temperature (Toper)	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature (Tstg)	Storage Temperature Range	-65掳C to +150掳C
Pin Configuration	Pin Configuration	See Pinout Diagram Below

Pin Configuration

Pin Number	Pin Name	Description
1	A0	Address Input 0
2	A1	Address Input 1
3	A2	Address Input 2
4	A3	Address Input 3
5	A4	Address Input 4
6	A5	Address Input 5
7	A6	Address Input 6
8	A7	Address Input 7
9	A8	Address Input 8
10	A9	Address Input 9
11	A10	Address Input 10
12	A11	Address Input 11
13	A12	Address Input 12
14	A13	Address Input 13
15	/OE	Output Enable (Low Active)
16	VSS	Ground
17	D0	Data Input/Output 0
18	D1	Data Input/Output 1
19	D2	Data Input/Output 2
20	D3	Data Input/Output 3
21	D4	Data Input/Output 4
22	D5	Data Input/Output 5
23	D6	Data Input/Output 6
24	D7	Data Input/Output 7
25	/WE	Write Enable (Low Active)
26	/CE	Chip Enable (Low Active)
27	VCC	Power Supply
28	NC	No Connect

Instructions for Use

1. Power Supply: Ensure that the supply voltage (VCC) is within the specified range of 4.5 V to 5.5 V.
2. Address Lines: Connect the address lines (A0-A13) to the appropriate address bus lines.
3. Data Lines: Connect the data lines (D0-D7) to the data bus lines.
4. Control Signals:
   • /CE (Chip Enable): Set to low to enable the device. High disables the device.
   • /OE (Output Enable): Set to low to enable data output. High disables data output.
   • /WE (Write Enable): Set to low to write data to the memory. High prevents writing.
5. Standby Mode: To minimize power consumption, set /CE high when the device is not in use.
6. Temperature Considerations: Ensure that the operating temperature is within the specified range of -40掳C to +85掳C.
7. Storage: Store the device in a dry environment with temperatures between -65掳C and +150掳C.

Notes

• Pin 28 (NC): This pin is not connected and should be left unconnected.
• Timing Requirements: Ensure that all timing parameters, such as access time and cycle time, are met to avoid data corruption or incorrect operation.

(For reference only)