Details

---

BUY BTB08-400C https://www.utsource.net/itm/p/12608283.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Rated On-State Current	IT(RMS)	-	8	-	A	RMS current at Tc = 25掳C
Peak On-State Current	ITSM	-	-	60	A	Non-repetitive peak on-state current
Maximum RMS Voltage	VDRM	-	-	400	V	Repetitive peak off-state voltage
Gate Trigger Current	IG(T)	10	20	30	mA	Gate trigger current at Tj = 25掳C
Holding Current	IH	5	10	15	mA	Minimum current to maintain on-state
Power Dissipation	PD	-	-	100	W	Maximum power dissipation at Tc = 25掳C
Junction Temperature	Tj	-40	-	125	掳C	Operating junction temperature range
Storage Temperature	Tstg	-40	-	125	掳C	Storage temperature range
Thermal Resistance	Rth(j-c)	-	1.5	-	掳C/W	Thermal resistance from junction to case

Instructions for Use:

1. Mounting and Handling:

   • Ensure the device is mounted on a suitable heatsink to manage thermal resistance.
   • Handle the device with care to avoid mechanical damage.

2. Electrical Connections:

   • Connect the main terminals (MT1 and MT2) to the load circuit.
   • Connect the gate terminal (G) to the control circuit.
   • Ensure all connections are secure and free from corrosion.

3. Operational Parameters:

   • Do not exceed the maximum ratings listed in the table.
   • Ensure the device operates within the specified temperature ranges to avoid thermal damage.
   • Use appropriate gate trigger currents to ensure reliable turn-on.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 125掳C.
   • Use thermal paste between the device and heatsink for better heat transfer.

5. Testing and Troubleshooting:

   • Test the device in a controlled environment before deploying it in the final application.
   • Check for proper triggering and holding currents during operation.
   • If the device fails, inspect for overvoltage, overcurrent, or thermal issues.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive environments.
   • Follow the storage temperature guidelines to ensure long-term reliability.

7. Safety Precautions:

   • Always use appropriate safety gear when handling high-voltage circuits.
   • Ensure the device is properly isolated from live circuits during installation and maintenance.

(For reference only)