Details

---

BUY 2SA1306A https://www.utsource.net/itm/p/12608289.html

Parameter	Symbol	Min	Typ	Max	Unit
Collector-Emitter Voltage	VCEO	-	-	80	V
Emitter-Collector Voltage	VECC	-	-	80	V
Base-Emitter Voltage	VBE	-	-	7	V
Collector Current	IC	-	1.5	5	A
Base Current	IB	-	-	0.5	A
Power Dissipation	PT	-	-	125	W
Junction Temperature	TJ	-	-	150	掳C
Storage Temperature	TSTG	-55	-	150	掳C

Instructions for Use:

1. Mounting and Handling:

   • Handle the 2SA1306A with care to avoid mechanical damage.
   • Ensure that the mounting surface is clean and flat.
   • Use appropriate thermal paste to enhance heat dissipation.

2. Electrical Connections:

   • Connect the collector (C) to the positive supply or load.
   • Connect the emitter (E) to the ground or negative supply.
   • Connect the base (B) to the control circuit.
   • Ensure all connections are secure and free from short circuits.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Operate within the specified temperature range to ensure reliable performance.
   • Use a heatsink if the power dissipation exceeds safe levels for the device.

4. Storage:

   • Store the 2SA1306A in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive substances and high humidity.

5. Testing:

   • Test the device using a multimeter or an appropriate test setup.
   • Verify the continuity and resistance values to ensure the device is functioning correctly.

6. Safety:

   • Always follow proper electrical safety procedures.
   • Use insulated tools and wear protective gear when handling live circuits.
   • Disconnect power before making any changes to the circuit.

(For reference only)