Details

---

BUY MAX4896ATP+T https://www.utsource.net/itm/p/12608295.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating range	4.5		5.5	V
Output Current	IOUT	Continuous output current		1.5		A
Efficiency	畏	At rated load	85		95	%
Switching Frequency	fSW			600		kHz
Input Capacitance	CIN			22		渭F
Output Capacitance	COUT			10		渭F
Thermal Shutdown	TSD	Activation threshold		160		掳C
Package Type				ATP+T

Instructions for MAX4896ATP+T:

1. Power Supply Connection:

   • Connect the VCC pin to a power supply within the specified operating range (4.5V to 5.5V). Ensure that the input voltage does not exceed the maximum rating to avoid damaging the device.

2. Output Configuration:

   • The output current should be set according to the application requirements, ensuring it does not exceed the continuous output current limit of 1.5A.
   • Use an appropriate output capacitor (typically 10渭F) to stabilize the output voltage and minimize ripple.

3. Input Filtering:

   • Place an input capacitor (typically 22渭F) close to the VCC pin to filter out noise and provide stable operation.

4. Thermal Management:

   • Monitor the device temperature to ensure it stays below the thermal shutdown threshold (160掳C). Proper heat sinking or PCB layout can help in maintaining operational temperatures.

5. Switching Frequency Adjustment:

   • The device operates at a typical switching frequency of 600kHz. Ensure that this frequency is suitable for your application to avoid interference with other system components.

6. Package Handling:

   • Handle the ATP+T package with care to prevent damage. Follow standard ESD precautions during installation and testing.

7. Testing and Validation:

   • After assembly, test the device under expected load conditions to verify performance parameters such as efficiency and output stability. Adjust component values if necessary to meet design specifications.

(For reference only)