Details

---

BUY BUK7510-55AL https://www.utsource.net/itm/p/12608306.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Continuous Drain Current	ID	-	55	-	A	Ta = 25掳C, Rth(j-c) = 1.5掳C/W
Pulse Drain Current	Ipp	-	165	-	A	t = 10 渭s, duty cycle = 1%
Gate-Source Voltage (ON)	Vgs(th)	1.0	-	2.5	V	ID = 1 mA, VDS = 10 V
Drain-Source Breakdown Voltage	BVdss	60	-	-	V	IG = 0 渭A, ID = 1 mA
Gate-Source Voltage	Vgss	-20	-	20	V	-
Drain-Source On-State Resistance	Rds(on)	-	4.5	-	m惟	VGS = 10 V, ID = 55 A, Ta = 25掳C
Gate Charge	Qg	-	93	-	nC	VGS = 10 V, ID = 55 A
Input Capacitance	Ciss	-	1850	-	pF	VDS = 15 V, f = 1 MHz
Output Capacitance	Coss	-	150	-	pF	VDS = 15 V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	1700	-	pF	VDS = 15 V, f = 1 MHz
Junction Temperature	Tj	-55	-	150	掳C	-
Storage Temperature Range	Tstg	-55	-	150	掳C	-

Instructions for Use:

1. Mounting and Handling:

   • Handle the device with care to avoid mechanical stress.
   • Ensure proper heat sinking to maintain junction temperature within specified limits.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals correctly.
   • Use short, low-inductance leads to minimize parasitic effects.

3. Gate Drive:

   • Apply a gate-source voltage (Vgs) within the specified range to ensure reliable operation.
   • Use a fast-switching gate driver to minimize switching losses.

4. Thermal Management:

   • Ensure adequate cooling to keep the junction temperature below the maximum rating.
   • Consider using a heatsink or forced air cooling if necessary.

5. Overcurrent Protection:

   • Implement overcurrent protection to prevent damage from excessive current.

6. Storage:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Follow ESD (Electrostatic Discharge) precautions to avoid damage during handling.

7. Testing:

   • Perform initial testing under controlled conditions to verify proper operation.
   • Monitor temperature and electrical parameters during operation to ensure reliability.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and regulatory standards.

(For reference only)