Details

---

BUY HCPL-7800A#500 https://www.utsource.net/itm/p/12608319.html

Parameter	Description
Device Type	Optocoupler, Gate Drive Isolator
Manufacturer	Broadcom Limited
Part Number	HCPL-7800A#500
Package Type	SOIC-8
Isolation Voltage	2500 Vrms (VISO)
Supply Voltage	VDD = 15 V (max)
Output Current	IO = 卤4.6 A (peak), 卤2.3 A (continuous)
Propagation Delay	tpdLH/tpdHL = 100 ns (typ)
Pulse Width Distortion	PWD = 20 ns (typ)
Operating Temperature	-40掳C to +100掳C
Storage Temperature	-55掳C to +150掳C
Input Forward Current	IF = 10 mA (min), 40 mA (max)
Common Mode Transient Immunity	CMTI = 卤100 kV/渭s (min)

Instructions for Use:

1. Power Supply Connection: Connect the supply voltage (VDD) and ground (GND) as specified in the pin configuration diagram.
2. Signal Input: Apply the input signal across pins designated for the LED input side. Ensure the current does not exceed the maximum rated forward current (IF).
3. Output Handling: The output side operates as a driver stage; connect the load or next stage according to the application circuit. Be cautious of the peak and continuous current ratings.
4. Thermal Management: Given the operating temperature range, ensure adequate heat dissipation if used in high ambient temperatures.
5. Safety Considerations: Handle with care due to the isolation voltage capability. Ensure proper PCB layout practices to maintain isolation integrity.
6. Mounting Orientation: Follow the recommended mounting orientation to avoid mechanical stress on the package leads.
7. Testing and Verification: Before deployment, verify all connections and perform functional tests under typical operating conditions.

(For reference only)