Details

---

BUY C834G https://www.utsource.net/itm/p/12608327.html

Parameter	Description	Value
Part Number	Component Identifier	C834G
Type	Component Type	Capacitor
Capacitance	Storage Capacity	100 渭F
Voltage Rating	Maximum DC Voltage	50 V
Tolerance	Variation from Nominal Value	卤20%
Operating Temperature	Range for Normal Operation	-55掳C to +85掳C
Case Size	Physical Dimensions	12.5 mm x 20 mm
Lead Spacing	Distance Between Leads	7.5 mm
Insulation Resistance	Resistance to Leakage Current	100 M惟 (min) at 20掳C
Dissipation Factor	Ratio of ESR to Reactance	0.15 (max) at 120 Hz, 20掳C
Mounting Style	Method of Attachment	Radial
Compliance	Regulatory Standards	RoHS Compliant

Instructions for Use:

1. Handling:

   • Handle the capacitor with care to avoid mechanical damage.
   • Do not apply excessive force or torque to the leads during soldering.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature setting of 350掳C to 380掳C.
   • Solder each lead for no more than 3 seconds.
   • Allow the capacitor to cool naturally after soldering.

3. Mounting:

   • Ensure the capacitor is mounted in the correct orientation if it is polarized.
   • Secure the capacitor to the PCB to prevent mechanical stress on the leads.

4. Storage:

   • Store the capacitors in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive gases or environments.

5. Testing:

   • Test the capacitance and leakage current using a multimeter or capacitance tester.
   • Ensure the values fall within the specified tolerance range.

6. Operating Conditions:

   • Operate the capacitor within the specified temperature range to ensure reliable performance.
   • Do not exceed the maximum voltage rating to prevent damage or failure.

7. Disposal:

   • Dispose of the capacitor according to local environmental regulations.
   • Recycle where possible.

(For reference only)