Details

---

BUY 4H11G https://www.utsource.net/itm/p/12608329.html

Parameter	Description	Value
Part Number	Device Identifier	4H11G
Type	Device Type	Relay
Coil Voltage	Operating Voltage of Coil	24VDC
Coil Current	Operating Current of Coil	40mA
Contact Form	Configuration of Contacts	SPDT
Contact Rating	Maximum Switching Capacity per Pole	10A at 250VAC
Insulation Resistance	Electrical Resistance Between Contacts	100M惟 min.
Dielectric Strength	Voltage Withstand Between Contacts	1500VAC for 1 minute
Mechanical Life	Number of Operations Before Failure	10 million cycles
Electrical Life	Number of Operations Under Load	100,000 cycles
Operating Temperature	Range of Ambient Temperatures	-40掳C to 85掳C
Mounting	Installation Method	PCB mount
Weight	Mass of the Component	30g

Instructions:

1. Installation: Ensure the relay is installed in a location that maintains the operating temperature range. Use the PCB mount method as specified.
2. Wiring: Connect the coil terminals to a 24VDC power supply. Wire the common (COM) terminal to your load and choose either normally open (NO) or normally closed (NC) contacts based on your application requirements.
3. Testing: After installation, test the relay under no-load conditions to ensure proper operation. Gradually apply load up to the rated capacity.
4. Maintenance: Regularly inspect the relay for signs of wear or damage, especially if it is frequently operated near its electrical life limit.
5. Handling Precautions: Handle with care to avoid damaging the sensitive components. Avoid exposing the relay to environments exceeding the specified temperature range.
6. End of Life: When the relay reaches the end of its electrical life, replace it promptly to avoid potential failures in the circuit.

(For reference only)